|
Do it yourself
| |||
| ||||
|
Model: Derbi Senda 125
It will be possible to replace the exhaust of the Derbi Senda 125 by loosening the screws that secure it to its housing: first, you will need to remove the side cover panel of the fender, under which the screws securing the supports will be located. Once these screws have been loosened, you can proceed to widen the connecting clamp positioned between the exhaust and the collector: the end can be removed, and you can then place the new replacement part. This must be secured and connected, ensuring that everything functions correctly.
Posted on 27 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Senda 125
To replace the exhaust on a Derbi Senda 125, loosen the bolts that secure the exhaust at the lower central part of the bike and at the rear. Once all…
Senda 125
To replace the exhaust on a Derbi Senda 125, loosen the bolts securing the exhaust at the lower central part of the bike and at the rear side. Once a…
Senda 125
To replace the exhaust on a Derbi Senda 125, completely unscrew the bolts securing it to its mounting: these are located at the top of the exhaust, n…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
