Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Exhaust on a Derbi Senda 125?

Model: Derbi Senda 125
Part: Exhaust muffler

Video tutorial

You can replace the exhaust fitted on the Derbi Senda 125 by loosening the screws that secure the cover panel located on the right side of the bike, next to the mudguard: once this is freed, you can proceed to remove the fixing screws of the supports.

Then you will need to widen the connecting clamp found between the exhaust and the manifold: at this point, insert the new exhaust end into its housing to secure it and check that everything functions correctly.


Posted on 12 April 2026 by ScegliAuto


Related tutorials

Senda 125 To replace the exhaust on a Derbi Senda 125, loosen the bolts that secure the exhaust at the lower central part of the bike and at the rear. Once all…
Senda 125 To replace the exhaust on a Derbi Senda 125, completely unscrew the bolts securing it to its mounting: these are located at the top of the exhaust, n…
Senda 125 It will be possible to replace the exhaust installed on the Derbi Senda 125 by loosening the screws that fix the exhaust terminal in the central lowe…

How to Set the Clock on the Kymco Agility?

To adjust the clock on the Kymco Agility, insert the key into the ignition to turn on the dashboard: once it is on, press and hold the button at the bottom left of the dashboard. You will notice that the hours will start to flash, which can be changed by repeatedly pressing the button to the right of the dashboard: once the hours are set, press the button on the left of the dashboard to adjust the minutes in the same way.

Watch the video!


by ScegliAuto

More videos