Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cylinder on a Derbi Senda 125

Model: Derbi Senda 125
Part: Engine

Video tutorial

To replace the cylinder on a Derbi Senda 125, you need to loosen the screws that secure it to the top of the engine. Once these screws are removed, you can detach the cylinder, also removing the corresponding spark plug and ignition coil.

Once the old cylinder has been removed, position the new one around the piston so that it can then be secured to the top of the engine block. This way, you can reinsert the spark plug and coil, ensuring that the entire engine functions correctly.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

Senda 125 To replace the piston on a Derbi Senda 125, completely remove the seat and take off all parts above the engine block. Next, disconnect the connectors…
Senda 125 To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that secure the engine block to its housing, then disconnect the conn…
Senda 125 To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that hold it to its housing in the center of the frame: once the fixi…

How to Set the Clock on the Benelli TRK 502X?

To adjust the clock on the Benelli TRK 502X, press and hold the button located at the bottom left of the instrument cluster: this will cause the hours to start flashing. By repeatedly pressing the adjacent button, you will be able to modify the hours; then press and hold the left button again to make the minutes start flashing. These can be changed in the same way as the hours, confirming by pressing the left button.

Watch the video!


by ScegliAuto

More videos