Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from a Derbi Senda 125?

Model: Derbi Senda 125
Part: Engine

Video tutorial

It is possible to remove the engine from the Derbi Senda 125 by taking it out of its housing, loosening the fixing screws that secure it to the respective supports. Once these screws are loosened, the engine can be removed, and after it has been taken out, you can proceed to remove the piston from its connecting rod and also unscrew the protective cover of the clutch.

Once the clutch has been removed and replaced along with all other necessary components, the engine can be reassembled and inserted back into the frame.


Posted on 27 March 2026 by ScegliAuto


Related tutorials

How do you disassemble the engine of the Derbi Senda 125?
How do you disassemble the engine of the Derbi Senda 125?
Senda 125 To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that hold it to its housing in the center of the frame: once the fixi…
How do you disassemble the engine of the Derbi Senda 125?
How do you disassemble the engine of the Derbi Senda 125?
Senda 125 To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that secure the engine block to its housing, then disconnect the conn…
How to Change the Engine Oil on the Derbi Senda 125?
How to Change the Engine Oil on the Derbi Senda 125?
Senda 125 To change the engine oil on the Derbi Senda 125, loosen the drain plug on the oil sump located at the central lower part of the bike. Once this is un…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos