Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil on the Derbi Senda 125?

Model: Derbi Senda 125
Part: Engine oil

Video tutorial

To change the engine oil on the Derbi Senda 125, loosen the drain plug on the oil sump located at the central lower part of the bike. Once this is unscrewed, allow all the used oil to flow into a suitably positioned container.

When the oil has drained out, close the drain plug again to proceed with topping up: this should be done by inserting a funnel into the breather located on the right side of the bike, topping up with the correct amount.


Updated on 28 August 2026 by ScegliAuto


Related tutorials

Senda 125 The DIY process for changing the engine oil on a Derbi Senda 125 is quite simple; here’s how to quickly perform the service. First, place your bike o…
Senda 125 Follow the necessary steps to perform the routine maintenance service by replacing the engine oil and oil filter of the Derbi Senda enduro bike. Firs…
Senda 125 To replace the clutch on a Derbi Senda 125, disconnect the pipes connected to the casing located at the lower right side of the bike. Once the pipes …

How to Set the Clock on the Kymco Agility?

To adjust the clock on the Kymco Agility, insert the key into the ignition to turn on the dashboard: once it is on, press and hold the button at the bottom left of the dashboard. You will notice that the hours will start to flash, which can be changed by repeatedly pressing the button to the right of the dashboard: once the hours are set, press the button on the left of the dashboard to adjust the minutes in the same way.

Watch the video!


by ScegliAuto

More videos