Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The DIY process for changing the engine oil on a Derbi Senda 125 is quite simple; here’s how to quickly perform the service. First, place your bike on a stand and start unscrewing the oil drain bolt located on the left side of the crankcase; allow the oil to drain into a container for about ten minutes, as shown in the video. Next, clean the cap from impurities and unscrew the filler screw to top up with new engine oil, the specifications of which are indicated in the user and maintenance manual!

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Derbi Senda 125?
How to Change the Engine Oil on the Derbi Senda 125?
Senda 125 To change the engine oil on the Derbi Senda 125, loosen the drain plug on the oil sump located at the central lower part of the bike. Once this is un…
How to Replace the Exhaust on a Derbi Senda 125?
How to Replace the Exhaust on a Derbi Senda 125?
Senda 125 You can replace the exhaust fitted on the Derbi Senda 125 by loosening the screws that secure the cover panel located on the right side of the bike, …
Guide to Changing the Engine Oil of the Derbi Senda 125
Guide to Changing the Engine Oil of the Derbi Senda 125
Senda 125 Follow the necessary steps to perform the routine maintenance service by replacing the engine oil and oil filter of the Derbi Senda enduro bike. Firs…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos