Do it yourself
Frequently asked questions about cars and motorcycles
Engine oil replacement on a Derbi Senda 125? Follow this guide to proceed with the replacement. Position the bike on a central stand; remove the plastic filler cap and using a socket spanner, unscrew the bolt of the oil sump (drain the fluid into a disposal bowl). Unscrew the oil filter if you need to replace it (fit the new oil filter). Finally, top up with new fluid in the engine and close with the plastic cap. Test the correct functioning of the bike. Use oil recommended by the manufacturer.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Senda 125 The DIY process for changing the engine oil on a Derbi Senda 125 is quite simple; here’s how to quickly perform the service. First, place your bike o…
Senda 125 To change the engine oil on the Derbi Senda 125, loosen the drain plug on the oil sump located at the central lower part of the bike. Once this is un…
Senda 125 This guide explains how to prepare the fuel mixture for the Derbi Senda 125 enduro bike. First, place your bike on the stand and open the fuel tank c…

How to adjust the valve clearance on the Moto Guzzi V85TT

Valve adjustment is very important to ensure the proper functioning of the engine; by following the appropriate instructions, it is indeed possible to adjust the valve clearance of the Moto Guzzi V85TT by yourself. First, put the motorcycle on the center stand and start by removing the cylinder head cover, unscrewing all the fixing screws; then use a feeler gauge to measure the valve clearance, adjusting it according to the instructions in the motorcycle's user manual, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos