Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Levers on a Derbi Senda?

Model: Derbi Senda 125
Part:

Video tutorial

To replace the levers, loosen the nut located at the end of the cable connected to the lever. This nut can be loosened to free the cable connected to the corresponding lever.

Then, unscrew the screw that connects the lever to its housing on the side of the handlebars. This will allow you to connect the new lever to the corresponding cable, positioning it in its housing.

Finally, secure it with the appropriate screw to ensure everything is functioning correctly.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

Senda 125 Today, we will see, in this brief guide, the main instructions that will allow us to replace the oil in the front forks of the Derbi Senda enduro mot…
Senda 125 To replace the exhaust on a Derbi Senda 125, loosen the bolts that secure the exhaust at the lower central part of the bike and at the rear. Once all…
Senda 125 To replace the sprocket on the Derbi Senda, loosen all the screws securing the protective panel on the left side. Beneath it, you will find the sproc…

How to Replace the Stator on the Triumph Daytona 675?

To replace the stator on the Triumph Daytona 675, loosen the screws that secure the cover located on the left side of the bike: once these screws have been removed, detach the cover and access the underlying stator. The stator can be removed from its housing by unscrewing the central screws that secure it: this way, you can insert a new stator into its housing, re-inserting the side starter motor. Once these components have been reinserted, close everything with the cover.

Watch the video!


by ScegliAuto

More videos