Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Derbi
    3. :
  3. Senda 125
    4. : How do you replace the wheel bearings on the Derbi Senda?

Model: Derbi Senda 125
Part: Bearing
How do you replace the wheel bearings on the Derbi Senda?

To replace the wheel bearings on the Derbi Senda, you need to completely remove both wheels by loosening the nuts of the corresponding central axle. This way, both wheels can be taken out of their housing. Then, you can proceed by loosening the bolts that fix the discs to the wheels, so that they can be completely removed. By sliding off the discs, it will be possible to remove the bearings located in the center of the wheels, using a puller to help. Then, you can insert the new bearing and reassemble all the components.


Posted on 22 August 2023 by ScegliAuto

How to install the cooling radiator on the Gasgas EC 300

Below we will see the instructions that will allow us to install the cooling radiator on the Gasgas EC 300 enduro motorcycle. The motorcycle is already set up for the installation of the radiator, which we will connect to the water pump; then we fix the radiator to the frame and connect the various pipes, as shown in the video. At this point, we top up with the new cooling liquid, suitable for our radiator; then we start the engine and let the new antifreeze liquid circulate, verifying the correct operation of the cooling system.

Watch the video!


by ScegliAuto

More videos