Do it yourself
Frequently asked questions about cars and motorcycles
This guide briefly explains the instructions to reset the maintenance light for the oil change on the Derbi Senda. First, place your bike on a stand and turn on the instrument cluster by turning the key to position one; then press the button on the right side of the cluster and enter the code to access the settings menu, allowing you to reset the service light, as shown in the video. Now start the engine and check that the warning has been reset!

Updated on 25 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Senda 125 Follow the necessary steps to perform the routine maintenance service by replacing the engine oil and oil filter of the Derbi Senda enduro bike. Firs…
Senda 125 To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that hold it to its housing in the center of the frame: once the fixi…
Senda 125 To replace the exhaust on a Derbi Senda 125, loosen the bolts that secure the exhaust at the lower central part of the bike and at the rear. Once all…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos