|
Do it yourself
| |||
| ||||
How do you replace the clutch of the Derbi Senda 125?
Model: Derbi Senda 125
Video tutorial
In order to replace the clutch of the Derbi Senda 125, you need to loosen the screws that secure the cover on the right side of the motorcycle: this cover can now be removed to access the components located in its lower part. The clutch discs must now be completely removed from their seat so that the new ones can be inserted: these can now be secured with the appropriate screws and the cover can be put back on. At this point, it will be possible to verify that everything is functioning correctly.
Posted on 7 February 2025 by ScegliAuto
Related tutorials
Senda 125
To replace the clutch on a Derbi Senda 125, disconnect the pipes connected to the casing located at the lower right side of the bike. Once the pipes …
Senda 125
To replace the starter motor on a Derbi Senda 125, you need to unscrew the bolts securing the cover located on the right side of the bike, under whic…
Senda 125
To adjust the clutch on the Derbi Senda, loosen or tighten the bolt located on the actuator connected to the clutch cable, positioned on the left sid…
|
How to Set the Clock on the Kymco Agility?
To adjust the clock on the Kymco Agility, insert the key into the ignition to turn on the dashboard: once it is on, press and hold the button at the bottom left of the dashboard. You will notice that the hours will start to flash, which can be changed by repeatedly pressing the button to the right of the dashboard: once the hours are set, press the button on the left of the dashboard to adjust the minutes in the same way. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |