|
Do it yourself
| |||
| ||||
|
Model: Derbi Senda 125
To adjust the clutch on the Derbi Senda, loosen or tighten the bolt located on the actuator connected to the clutch cable, positioned on the left side of the bike just above the clutch cover. To make the clutch lever firmer, tighten the bolt above the cover, and to make it lighter, loosen the bolt. Additionally, detach the cable sheath at the clutch lever to access and adjust the washer between the clutch cable and its lever.
Updated on 13 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Senda 125
Follow this guide for instructions on how to dismantle and replace the clutch discs on a Derbi Senda 125 with these simple steps. First, place your m…
Senda 125
To replace the clutch on a Derbi Senda 125, disconnect the pipes connected to the casing located at the lower right side of the bike. Once the pipes …
Senda 125
In order to replace the clutch of the Derbi Senda 125, you need to loosen the screws that secure the cover on the right side of the motorcycle: this …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.031
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
