Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Tm Racing
    3. :
  3. Tm Racing 125
    4. : How do you replace the clutch of the TM Racing 125?

Model: Tm Racing Tm Racing 125
Part: Clutch
How do you replace the clutch of the TM Racing 125?

The replacement of the clutch on the TM Racing 125 is done by loosening the screws that secure the side semi-casing located on the right side of the bike. Once these screws have been loosened, it will be possible to remove the casing and loosen the underlying nuts that secure the clutch discs. These can now be completely removed from their housing and replaced with new spare parts. After replacing and installing the new clutch, the whole thing can be covered with the casing, ensuring that everything functions correctly.


Posted on 8 November 2023 by ScegliAuto



How do you replace the clutch on a TM Racing 125?
Tm Racing 125 To replace the clutch of the TM Racing 125, you need to unscrew the bolts that fix the casing of the left side of the engine: after the bolts have be
How do you adjust the clutch lever on the TM Racing 125?
Tm Racing 125 To adjust the clutch lever of the TM Racing 125, you need to screw the nut located at the base of the lever, on the side of the handlebars: tighten t
How do you disassemble the engine of the TM Racing 125?
Tm Racing 125 To disassemble the engine of the TM Racing 125, you need to extract the engine block from its housing: to do this, it will be necessary to loosen the

How to change the engine oil and its filter on the Triumph Bonneville T100

The guide shows you how to change the Triumph Bonneville T100 engine oil. The first operation to perform is to position the motorcycle safely on the side stand. At this point, with an 8 mm wrench, unscrew the oil pan drain bolt and drain the fluid into a container for disposal. Unscrew the oil filter, located in a recess near the previously opened bleed valve, and let the remaining oil flow into the container. Remove the oil tank cap to make it easier to drain the liquid. At this point, mounted a new gasket on the cap, tighten it in place at 25 Newton Meters. Grease the filter gasket and mount it in place; if you have a special wrench, tighten the filter to 10 Newton Meters. Position the motorcycle on the central stand, top up the engine oil; check the window to see the level. Start the engine for a few minutes and then top up.

Watch the video!


by ScegliAuto

More videos