Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the clutch lever on the TM Racing 125?

Model: Tm Racing Tm Racing 125
Part:

Video tutorial

To adjust the clutch lever on the TM Racing 125, locate the nut at the base of the lever on the side of the handlebars: tighten the nut to reduce the lever's travel and make it stiffer. Conversely, loosen it to increase the travel and make the lever softer.

Additionally, you can adjust the lever's intensity by tightening the nut at the clutch pushrod. You will also need to adjust the nut at the other end of the clutch cable, on the left side of the bike.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a TM Racing 125
How to Replace the Clutch on a TM Racing 125
Tm Racing 125 To replace the clutch on a TM Racing 125, you need to unscrew the bolts securing the left side engine cover. Once the bolts are removed, detach the c…
How to Replace the Clutch on a TM Racing 125?
How to Replace the Clutch on a TM Racing 125?
Tm Racing 125 To replace the clutch on a TM Racing 125, loosen the screws securing the side casing located on the right side of the bike. Once these screws are loo…
How to Start a TM Racing 125
How to Start a TM Racing 125
Tm Racing 125 Before you can start, sit on the seat of your TM Racing 125. Begin by opening the fuel tap. Next, insert the key into the ignition barrel and turn it…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos