Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Tm Racing
    3. :
  3. Tm Racing 125
    4. : How to start a TM Racing 125

Model: Tm Racing Tm Racing 125
Part: Checks and maintenance
How to start a TM Racing 125

Before being able to start, we will have to sit on the saddle of our TM Racing 125. So let's start by opening the petrol tap. Next, we will have to insert the key into the ignition lock, and then turn it clockwise. Once this is done, we will have to pull out the ignition lever located on the right side of the engine block the brake lever. At this point, we will have to push the ignition lever hard and repeatedly with the foot, until the engine has started. When it lights up, we will be able to close the ignition lever, and we will have finished the procedure.


Posted on 27 February 2024 by ScegliAuto



How to start the Tm Racing 125
Tm Racing 125 In this video tutorial we will see the instructions on how to start the Tm Racing 125 2-stroke, but the same procedure applies to all other 2-stroke
How to disassemble the muffler terminal of a TM Racing 125
Tm Racing 125 Before we can start, it is advisable to place our TM Racing 125 on a central stand, so as to position it vertically. This operation must be carried o
How to remove the tank of a Tm Racing 125
Tm Racing 125 Before we can start, we will have to go and place our Tm Racing 125 on a central stand, in order to keep it perpendicular to the ground. So let's sta

How to change the engine oil and the relative filter of the Ducati 999

The guide shows how to change the Ducati 999 engine oil. If you have racing stands, you can use them too. Start the motorcycle to make the oil fluid and remove the right fairing by removing the fixing points and the fixing bolts. Place a container under the oil pan to dispose of the fluid and unscrew the drain bolt; also unscrew the oil filler cap. Unscrew the four screws of the mesh filter and empty it; pay attention to the cap gasket. Detach the mesh filter from its housing, taking care not to break it; clean it well before reassembling it. Unscrew the oil filter and drain the fluid. Put the filters back in place, after having greased the gaskets and refilling the tank. Run the engine for a few minutes and then top up the oil level.

Watch the video!


by ScegliAuto

More videos