Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start the Tm Racing 125

Model: Tm Racing Tm Racing 125
Part: Checks and maintenance

Video tutorial

In this video tutorial, you will see instructions on how to start the Tm Racing 125 two-stroke, but the same procedure applies to all other two-stroke enduro bikes such as Husqvarna, Husaberg, and KTM. First, turn the key on your bike to power up the dashboard; then uncover the kickstart lever located on the right side of the engine, as shown in the video.

For the first cold start of your bike, pull the choke cable to assist with starting the engine; once the engine settles down, you can release the choke.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Start a TM Racing 125
How to Start a TM Racing 125
Tm Racing 125 Before you can start, sit on the seat of your TM Racing 125. Begin by opening the fuel tap. Next, insert the key into the ignition barrel and turn it…
How to Remove the Exhaust End Can from a TM Racing 125
How to Remove the Exhaust End Can from a TM Racing 125
Tm Racing 125 Before you begin, it is advisable to place your TM Racing 125 on a centre stand to position it vertically. This operation should be performed with th…
How to Remove the Fuel Tank from a Tm Racing 125
How to Remove the Fuel Tank from a Tm Racing 125
Tm Racing 125 Before you start, position your Tm Racing 125 on a central stand to keep it perpendicular to the ground. Begin by unscrewing and removing the screws …

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos