Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before you begin, it is advisable to place your TM Racing 125 on a centre stand to position it vertically. This operation should be performed with the engine and exhaust cold to avoid risks. Start by loosening the nut that tightens the clamp connecting the end can to the exhaust body. Next, unscrew and remove the upper bolt that secures the support bracket of the end can to the rear mudguard. Once you have completed this last step, you will have successfully removed the end can.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Tank from a Tm Racing 125
How to Remove the Fuel Tank from a Tm Racing 125
Tm Racing 125 Before you start, position your Tm Racing 125 on a central stand to keep it perpendicular to the ground. Begin by unscrewing and removing the screws …
How to Remove the Front Wheel of a TM Racing 125
How to Remove the Front Wheel of a TM Racing 125
Tm Racing 125 Before you can start, you need to lift your TM Racing 125 using motorcycle stands. Begin by moving the front brake caliper by simply unscrewing the f…
How to Dismantle the Engine of the Tm Racing 125
How to Dismantle the Engine of the Tm Racing 125
Tm Racing 125 Today, in this brief and simple guide, follow the steps to dismantle the engine block of the Tm Racing 125 motorcycle. First, remove the engine block…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos