Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Tm Racing
    3. :
  3. Tm Racing 125
    4. : How to remove the front wheel of a TM Racing 125

Model: Tm Racing Tm Racing 125
Part: Wheel
How to remove the front wheel of a TM Racing 125

Before we can start, we will have to go and lift our TM Racing 125, using motorcycle stands. Let's start by moving the front brake caliper, simply unscrewing the fixing bolts. After that, we will have to unscrew and remove the nut fixing the front wheel axle. Once this is done, we will have to slide out and remove the pin itself. By doing so, we will have freed the front wheel. At this point, we will simply have to remove the front wheel, pulling it towards us. When we have completed this last step, we will have completed the disassembly.


Posted on 4 February 2024 by ScegliAuto



How to change the TM Racing 125 gearbox oil?
Tm Racing 125 In order to change the gearbox oil of the TM Racing 125 it is necessary to loosen the bolt of the oil tank drain plug, which is located in the front
How do you change the TM Racing 125 gear oil?
Tm Racing 125 In order to replace the TM Racing 125 gearbox oil it is necessary to loosen the drain plug which is positioned in the lower part of the engine block:
How do you change the piston of a TM Racing 125?
Tm Racing 125 In order to remove the piston of a TM Racing 125 you must first remove the saddle and the side fairings. Subsequently it will be necessary to remove

How to change the engine oil and the relative filter of the Ducati 999

The guide shows how to change the Ducati 999 engine oil. If you have racing stands, you can use them too. Start the motorcycle to make the oil fluid and remove the right fairing by removing the fixing points and the fixing bolts. Place a container under the oil pan to dispose of the fluid and unscrew the drain bolt; also unscrew the oil filler cap. Unscrew the four screws of the mesh filter and empty it; pay attention to the cap gasket. Detach the mesh filter from its housing, taking care not to break it; clean it well before reassembling it. Unscrew the oil filter and drain the fluid. Put the filters back in place, after having greased the gaskets and refilling the tank. Run the engine for a few minutes and then top up the oil level.

Watch the video!


by ScegliAuto

More videos