Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the V-Belt light on the Yamaha Xmax 125?

Model: Yamaha Xmax 125
Part: Warning light – error code

This video is currently unavailable

To reset the V-Belt light on the Yamaha Xmax 125, insert the key into the ignition barrel and turn it to switch on the instrument cluster. To reset the light, pull in the lever located at the base of the right handlebar.

While holding the lever down, the light will start to flash until the kilometres remaining until the next replacement are reset. Once the kilometres have increased, release the lever and complete the operation by switching off the instrument cluster.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to reset the V-Belt warning light on the Yamaha Xmax 125?
Xmax 125 To reset the V-Belt warning light on the Yamaha Xmax 125, you need to turn on the instrument panel by inserting the ignition key into the ignition sw…
How to Reset the V-Belt Warning Light on a Yamaha Xmax 125
How to Reset the V-Belt Warning Light on a Yamaha Xmax 125
Xmax 125 On the Yamaha Xmax 125, resetting the V-Belt warning light involves inserting the key into the ignition switch and turning it to power on the instrum…
How do you reset the V-Belt light on the Yamaha Xmax 125?
How do you reset the V-Belt light on the Yamaha Xmax 125?
Xmax 125 On board the Yamaha Xmax 125, the V-Belt indicator light can be reset by turning on the instrument panel, inserting the ignition key into its block: …

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos