Do it yourself
Frequently asked questions about cars and motorcycles
On the Yamaha Xmax 125, the reset operation of the V-Belt warning light involves inserting the key into the ignition switch and turning it to turn on the instrument panel. To reset the warning light, you will need to pull the lever located at the base of the right handlebar grip towards the inside. By holding down the lever, the warning light will start flashing until the remaining kilometers until the next replacement are reset. Once the kilometers have been adjusted, you can release the lever and complete the operation by turning off the instrument panel.

Posted on 15 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Xmax 125 To reset the V-Belt light on the Yamaha Xmax 125, insert the key into the ignition barrel and turn it to switch on the instrument cluster. To reset t…
Xmax 125 Start the reset procedure for the V-Belt warning light on the Yamaha Xmax 125 by turning on the instrument panel. It is not necessary to start the en…
Xmax 125 To reset the V-Belt warning light on the Yamaha Xmax 125, you need to turn on the instrument panel by inserting the ignition key into the ignition sw…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos