Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reset the V-Belt warning light on the Yamaha Xmax 125, you need to turn on the instrument panel by inserting the ignition key into the ignition switch: once the panel is on, you can remove the panels located on the left front side. Below, you will find a connector that must be disconnected for five seconds, as shown in the tutorial; after this time has passed, reconnect the connector so that the light turns off completely. At the end of the procedure, you can turn off the instrument panel.

Updated on 22 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to reset the V-Belt light on the Yamaha Xmax 125?
Xmax 125 To reset the V-Belt light on the Yamaha Xmax 125, insert the key into the ignition barrel and turn it to switch on the instrument cluster. To reset t…
How to Turn Off the V-Belt Warning Light on the Yamaha Xmax 125?
How to Turn Off the V-Belt Warning Light on the Yamaha Xmax 125?
Xmax 125 .. Start the reset procedure for the V-Belt warning light on the Yamaha Xmax 125 by turning on the instrument panel. It is not necessary to.. …
How do you reset the V-Belt indicator light on the Yamaha Xmax 125?
How do you reset the V-Belt indicator light on the Yamaha Xmax 125?
Xmax 125 On the Yamaha Xmax 125, the reset operation of the V-Belt warning light involves inserting the key into the ignition switch and turning it to turn on…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos