Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the V-Belt Warning Light on the Yamaha Xmax 125?

Model: Yamaha Xmax 125
Part: Warning light – error code

Video tutorial

Start the reset procedure for the V-Belt warning light on the Yamaha Xmax 125 by turning on the instrument panel. It is not necessary to start the engine.

Disconnect the jumper as shown in the video. This must remain disconnected for exactly 5 seconds, not one second more or less.

Reconnect the jumper and check that the V-Belt warning light has turned off. Another method to reset this light involves using a computer with specific diagnostic software and an OBD connector to link it to the scooter. As these are tools not everyone has available, this second procedure requires a visit to the workshop.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

Reset the belt change warning of the Yamaha Xmax 125
Reset the belt change warning of the Yamaha Xmax 125
Xmax 125 Below we will see the instructions that will allow us to reset the transmission belt change warning of the Yamaha Xmax 125 scooter, as well as the 30…
How to reset the V-Belt warning light on the Yamaha Xmax 125?
Xmax 125 .. To reset the V-Belt warning light on the Yamaha Xmax 125, you need to turn on the instrument panel by inserting the.. …
How to Reset the V-Belt Warning Light on a Yamaha Xmax 125
How to Reset the V-Belt Warning Light on a Yamaha Xmax 125
Xmax 125 On the Yamaha Xmax 125, resetting the V-Belt warning light involves inserting the key into the ignition switch and turning it to power on the instrum…

How to Replace the Fork on a Peugeot Kisbee?

To replace the fork on a Peugeot Kisbee, loosen the bolts securing the front wheel to its housing: you will need to unscrew the bolts that hold the corresponding nut to remove the central axle of the wheel. Next, disconnect the brake caliper from the disc and proceed by unscrewing the bolts of the fairings that surround the fork: at this point, you can loosen the bolts that secure the fork to the steering, allowing you to insert the new one. This can then be secured to the steering, covered with the fairing, and the front wheel installed.

Watch the video!


by ScegliAuto

More videos