Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does error code 46 indicate on the Yamaha Nmax?

Model: Yamaha Nmax
Part: Warning light – error code

Video tutorial

The "error code 46" of the Yamaha Nmax indicates a malfunction of the abnormal electrical supply to the fuel injection system relay. When this error code appears, it is necessary to go to the workshop as the error must be corrected first through the OBD socket and diagnostic computer.

The cause is a malfunction of the relay due to sensor breakage. The first thing to do is to replace the sensor and only then replace the relay.

The sensor is located near the fuel pump and the starter motor, while the relay is inside the fuse box near the battery compartment.


Posted on 21 December 2024 by ScegliAuto


Related tutorials

What does the V-Belt warning light indicate on the Yamaha NMAX scooter and how to reset it?
What does the V-Belt warning light indicate on the Yamaha NMAX scooter and how to reset it?
Nmax If the V-Belt warning light on the instrument panel of your Yamaha NMAX scooter is illuminated, it means it's time to replace the drive belt as the m…
What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?
What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?
Nmax If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has ex…
How to Reset the V-Belt Warning Light on the Yamaha NMAX Scooter?
How to Reset the V-Belt Warning Light on the Yamaha NMAX Scooter?
Nmax On the Yamaha NMAX scooter, the V-Belt warning light indicates that maintenance of the drive belt is required after exceeding the relevant mileage in…

How to Change the Engine Oil in a Piaggio MP3 400 Scooter?

As seen in this tutorial, changing the engine oil in a Piaggio MP3 400 scooter is an extremely simple and quick operation. Before proceeding, ensure the engine is sufficiently cool. Start by positioning a container underneath the scooter, then locate the drain hole bolt and loosen it with a socket spanner. Allow all the oil in the system to drain out, then remove the secondary filter and clean it of any residues. At this point, simply replace the main filter, reassemble everything, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos