Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

Model: Yamaha Nmax
Part: Warning light – error code

Video tutorial

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive.

Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question.

At this point, press and hold the right button once to initialise the reset, and a second time to complete it.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

What does the V-Belt warning light indicate on the Yamaha NMAX scooter and how to reset it?
What does the V-Belt warning light indicate on the Yamaha NMAX scooter and how to reset it?
Nmax If the V-Belt warning light on the instrument panel of your Yamaha NMAX scooter is illuminated, it means it's time to replace the drive belt as the m…
How to Reset the V-Belt Light on Yamaha Nmax?
How to Reset the V-Belt Light on Yamaha Nmax?
Nmax You can eliminate the V-Belt light from the instrument cluster of the Yamaha Nmax by turning on the ignition, turning the key in the ignition switch:…
How to Reset the V-Belt Warning Light on the Yamaha NMAX Scooter?
How to Reset the V-Belt Warning Light on the Yamaha NMAX Scooter?
Nmax On the Yamaha NMAX scooter, the V-Belt warning light indicates that maintenance of the drive belt is required after exceeding the relevant mileage in…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos