Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the V-Belt Light on Yamaha Nmax?

Model: Yamaha Nmax
Part: Warning light – error code

Video tutorial

You can eliminate the V-Belt light from the instrument cluster of the Yamaha Nmax by turning on the ignition, turning the key in the ignition switch: once the display is on, repeatedly press the SELECT button until the total odometer is displayed. Once the mileage is shown, press and hold the RESET button, so the V-Belt light stops flashing and disappears completely from the display.

Once the procedure is complete, you can turn off the instrument cluster by turning the key back.


Posted on 20 April 2026 by ScegliAuto


Related tutorials

How to Reset the V-Belt Light on a Yamaha Nmax?
How to Reset the V-Belt Light on a Yamaha Nmax?
Nmax To reset the V-Belt light on a Yamaha Nmax, turn on the instrument cluster by turning the ignition key in its lock: once the cluster is on, repeatedl…
How to Reset the V-Belt Warning Light on the Yamaha NMAX Scooter?
How to Reset the V-Belt Warning Light on the Yamaha NMAX Scooter?
Nmax On the Yamaha NMAX scooter, the V-Belt warning light indicates that maintenance of the drive belt is required after exceeding the relevant mileage in…
What does the V-Belt warning light indicate on the Yamaha NMAX scooter and how to reset it?
What does the V-Belt warning light indicate on the Yamaha NMAX scooter and how to reset it?
Nmax If the V-Belt warning light on the instrument panel of your Yamaha NMAX scooter is illuminated, it means it's time to replace the drive belt as the m…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos