Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the transmission oil seal on the KTM XC 250

Model: Ktm Xc 250

Video tutorial

This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt; then remove the transmission cover and use something thin and pointed to extract the oil seal, as shown in the video.

At this point, correctly install the new oil seal, pressing it in until it is flush, following the video tutorial to the end!


Updated on 6 August 2026 by ScegliAuto


Related tutorials

Xc 250 Below are the steps to remove and replace the crankshaft oil seal on the Ktm XC 250 enduro bike. First, place your bike on a stand and begin by remov…
Xc 250 In this video tutorial, you will learn how to change the transmission oil in the KTM EXC-W 250 enduro bike, in simple and quick steps. First, remove …
Xc 250 Here are the main steps for performing routine maintenance by changing the engine oil and oil filter on the KTM XC 250, as well as the XC 300. First,…

How to Remove the Front Wheel of the Ducati Panigale 1299

Today, we will discover the necessary instructions to remove and replace the front wheel and tyre of the Ducati Panigale 1299. First, place your bike on a stand and begin loosening the central axle of the wheel; then, use the front stand to lift the wheel off the ground, as shown in the video. Next, unscrew the bolts securing the front brake calipers to remove them from the disc; remove the wheel nut to take off the wheel, and if necessary, replace the tyre, then reassemble everything!

Watch the video!


by ScegliAuto

More videos