Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial we can see how to replace the spark plug in the Suzuki Burgman Street 125 scooter, a very simple and fast operation. First of all, we wait for the engine to be cold enough, then we open the seat and, using a simple Phillips screwdriver, we unscrew all the screws indicated. We then remove both the seat itself and the central lower cover, locate the spark plug connector and disconnect it by pulling it outwards. At this point, all that remains is to unscrew the old spark plug with the appropriate key, tighten the replacement and reassemble everything.

Posted on 23 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Burgman Street 125 In this tutorial, you will see how to replace the spark plug on the Suzuki Burgman Street 125 scooter, a very simple and quick operation. First, wait…
Burgman Street 125 When the engine of the 2023 Suzuki Burgman Street 125 does not start, one of the causes could be a malfunction of the spark plugs. To replace the spa…
Burgman Street 125 In this tutorial, you will see how to change the engine oil on the Suzuki Burgman Street 125 scooter, a very simple and quick operation. First, ensur…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos