Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, see how to replace the front brake pads on a Suzuki Burgman Street 125 scooter, a very simple and quick operation. First, position yourself in front of the brake in question, then undo the two mounting bolts of the caliper using a 12mm socket. Next, separate the caliper from the fork, unscrew the long pin, and remove the old pads. At this point, clean any dirt residue present, position the replacement pads, and reassemble everything by following the reverse procedure.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Suzuki Burgman Street 125 Scooter?
How to Replace the Front Brake Pads on a Suzuki Burgman Street 125 Scooter?
Burgman Street 125 .. In this tutorial, you will learn how to replace the front brake pads on a Suzuki Burgman Street 125 scooter, a very simple and quick operation... …
How to replace the battery in the Suzuki Burgman Street 125 scooter?
How to replace the battery in the Suzuki Burgman Street 125 scooter?
Burgman Street 125 In this tutorial we can see how to replace the battery in the Suzuki Burgman Street 125 scooter, an extremely simple and quick operation. First of al…
How to Replace the Battery on a Suzuki Burgman Street 125 Scooter?
How to Replace the Battery on a Suzuki Burgman Street 125 Scooter?
Burgman Street 125 In this tutorial, you will see how to replace the battery on a Suzuki Burgman Street 125 scooter, a very simple and quick operation. First, ensure th…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos