Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Suzuki Burgman Street 125 Scooter?

Model: Suzuki Burgman Street 125
Part: Brake pads

Video tutorial

In this tutorial, you will learn how to replace the front brake pads on a Suzuki Burgman Street 125 scooter, a very simple and quick operation. First, position yourself in front of the brake in question, then loosen the pin using a 12mm socket and, with an Allen key, unscrew the two fixing bolts.

Next, separate the caliper from the brake, remove the old pads, and clean any dirt residue present. At this point, simply insert the replacement pads and reassemble everything by following the reverse procedure.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Suzuki Burgman Street 125 Scooter
How to Replace the Front Brake Pads on a Suzuki Burgman Street 125 Scooter
Burgman Street 125 .. In this tutorial, see how to replace the front brake pads on a Suzuki Burgman Street 125 scooter, a very simple and quick operation... …
How to disassemble the front wheel of the Suzuki Burgman Street 125
How to disassemble the front wheel of the Suzuki Burgman Street 125
Burgman Street 125 In this guide, we will see step-by-step instructions on how to disassemble and replace the front wheel and tire of the Suzuki Burgman Street 125 scoo…
Where to find the main fuses of the Suzuki Burgman Street 125
Where to find the main fuses of the Suzuki Burgman Street 125
Burgman Street 125 Today's steps will show us how to identify the main fuses, including those of the ignition, of the Suzuki Burgman Street 125 scooter. First, we put t…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos