Do it yourself
Frequently asked questions about cars and motorcycles
In this guide, we will see step-by-step instructions on how to disassemble and replace the front wheel and tire of the Suzuki Burgman Street 125 scooter. First, we put the scooter on the center stand and start unscrewing the central wheel axle, using a socket wrench with extension; then we remove the axle to extract the wheel, disconnecting the brake caliper from the disk, as shown in the video. At this point, if necessary, we replace the front tire; we correctly reposition the wheel, inserting the axle and fastening it with a torque wrench.

Posted on 1 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Burgman Street 125 In this tutorial, you will see how to set the time on a Suzuki Burgman Street 125 scooter, a very simple and quick operation, to be done after discon…
Burgman Street 125 In this tutorial, you will see how to reset the service on a Suzuki Burgman Street 125 scooter, an extremely simple and quick operation, to be perfor…
Burgman Street 125 In this tutorial, you will see how to set the time on the Suzuki Burgman Street 125 scooter, a very simple and quick operation, to be performed after…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos