Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw G310
Part: Exhaust muffler

The operation of replacing the muffler on the BMW G310 is carried out by loosening the screws that fix the appropriate muffler to the corresponding supports, located on the right side of the motorcycle near the rear wheel: once these exhaust terminal fixing screws have been unscrewed, it will be possible to proceed by widening the ring that connects the manifold to the muffler. This can now be removed from its seat so that it can be replaced with a new spare part: the new muffler can then be properly fixed to the supports to ensure that everything is functioning correctly.

Posted on 22 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Stator on the BMW G310?
How to Replace the Stator on the BMW G310?
G310 To replace the stator on the BMW G310, loosen the screws securing the cover located on the left side of the bike, near the front. Once the cover scre…
How to Replace the Spark Plug on the BMW G310
How to Replace the Spark Plug on the BMW G310
G310 To replace the spark plug on the BMW G310, you need to loosen the screws that secure the seat and those that secure the fuel tank cover, removing the…
How do you replace the headlight bulb of the BMW G310?
How do you replace the headlight bulb of the BMW G310?
G310 To replace the headlight bulb of the BMW G310, you need to pry off the side panels of the headlight by using an object to access the screws underneat…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos