Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on the BMW G310

Model: Bmw G310
Part: Starter motor

Video tutorial

This brief and simple guide outlines the steps necessary to remove and replace the starter motor on the BMW G310 motorcycle, following the instructions below. First, place the motorcycle on its centre stand and disconnect the positive terminal of the battery; then locate the starter motor above the oil filter.

Now, unscrew the fixing screws of the starter motor, disconnect the electrical connector to remove it and replace it with the new one (using the original spare part); then reassemble everything, connecting it and securing it with the appropriate bolts.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on the BMW G310
How to Replace the Rear Brake Pads on the BMW G310
G310 To replace the rear brake pads on the BMW G310, loosen the bolts securing the brake caliper to the corresponding disc. Once these bolts are loosened,…
How to replace the exhaust on the BMW G310?
How to replace the exhaust on the BMW G310?
G310 To replace the exhaust on the BMW G310, loosen the screws that secure the exhaust to the corresponding supports located on the right side of the bike…
How to Replace the Stator on the BMW G310?
How to Replace the Stator on the BMW G310?
G310 To replace the stator on the BMW G310, loosen the screws securing the cover located on the left side of the bike, near the front. Once the cover scre…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos