Do it yourself
Frequently asked questions about cars and motorcycles
To reset the V-Belt warning light on the Yamaha Xmax 250, it is necessary to disconnect the connector related to the sensor that regulates the belt wear: this connector will be located inside the front of the motorcycle. In order to access it, you will need to completely remove the front fairing of the motorcycle: once this fairing has been removed, you can disconnect the connector underneath, so that the sensor is no longer active. This way, when you turn on the instrument panel, the V-Belt warning light will be reset.

Posted on 23 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Xmax 250 Today we discover the instructions that will allow us to reset the transmission belt change indicator light of the Yamaha Xmax 250 scooter. First, we…
Xmax 250 The V-Belt indicator light that appears on the instrument panel of the Yamaha Xmax 250 can be reset by inserting the key into the corresponding lock …
Xmax 250 In this tutorial, you will learn how to reset the service indicator for the drive belt on the Yamaha XMAX 250 scooter, indicated by the V-BELT warnin…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos