Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
If for any reason we find the Piaggio Beverly 300 thermometer set to Fahrenheit instead of Celsius, to change it we turn on the instrument panel and press the Mode button on the right handlebar. We will see the F indication of the thermometer flashing and after a few seconds changing to C, we release the button and turn off the panel. If the odometer scale is also indicated in Miles instead of Kilometers, to proceed with the conversion we turn on the panel, press the Mode button until the indication of the battery voltage appears on the display, hold down the Mode button until the flashing miles indication appears, at the end of the flashing the kilometers indication will appear, we release the button and turn off the panel.

Posted on 22 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on the Piaggio Beverly 300
How to set the time on the Piaggio Beverly 300
Beverly 300 The following steps will show us how to change the time on the display of the instrument panel of the Piaggio Beverly 300 scooter. First, we put the …
Headlight adjustment on Piaggio Beverly 300
Headlight adjustment on Piaggio Beverly 300
Beverly 300 Through this very useful video tutorial, we can see the entire operation necessary to adjust the headlight on a Piaggio Beverly 300/350. This operati…
Replacing the Battery of the Piaggio Beverly 300
Replacing the Battery of the Piaggio Beverly 300
Beverly 300 Briefly, we will see the instructions that will allow you to remove and replace the battery of the Piaggio Beverly 300 scooter. First, place the scoo…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos