Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Fazer
Part: Engine oil

Let's see how to proceed to change the engine oil and filter of the Yamaha Fazer 1000. Put the motorcycle on the center stand and let the engine warm up at idle for a few minutes to make the oil more fluid. Turn off the motorcycle, unscrew the oil filler cap, place a collection basin under the drain plug and unscrew the drain plug to drain the old oil. Now we need to unscrew the filter, located behind the exhaust manifolds on which we will put some paper to prevent oil from dripping, using the appropriate strap wrench. Once all the old oil has drained out, install the new filter, being careful to apply a thin layer of oil on the o-ring, and tighten it by hand. Replace the drain plug and pour about 3.2 liters of new oil into the filler hole. Screw on the cap and start the engine to check for any leaks. Dispose of the old oil properly.

Posted on 10 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the motor oil in the Yamaha Fazer 1000?
How to replace the motor oil in the Yamaha Fazer 1000?
Fazer In this tutorial we can see how to replace the engine oil in the Yamaha Fazer 1000, an extremely simple and fast operation. First of all, we wait for…
How to replace the battery in the Yamaha Fazer?
How to replace the battery in the Yamaha Fazer?
Fazer In this tutorial, we can see how to replace the battery in the Yamaha Fazer, an extremely simple and quick operation. First of all, make sure that th…
How to change the engine oil of a Yamaha Fazer?
How to change the engine oil of a Yamaha Fazer?
Fazer To change the motor oil of a Yamaha Fazer, start by warming up the engine for a few minutes to thin out the oil, then turn it off. Make sure the moto…

How to Replace the Front Bulb on the Honda SH 125

This tutorial explains the steps to replace the front headlamp bulb on the Honda SH 125. This is a very simple procedure. First, remove the front shield of the scooter to access the bulb replacement. To perform this first step, unscrew the lower screw and the two upper screws that secure the cover. At this point, the bulb will be clearly visible. Simply unscrew the bulb and insert a new one. It is recommended to carry out this procedure after ensuring that the bulb to be removed has cooled down.

Watch the video!


by ScegliAuto

More videos