Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbf 600
Part: Battery

In this tutorial, you can see how to replace the battery in a Honda CBF 600N, a very simple and quick operation. First, ensure that the key is not inserted. Then, remove both the passenger and rider seats and unclip the right side plastic panel. Next, unscrew the indicated bolt with a 10mm socket, detach the strap, and move the entire block of cables in front of the battery. At this point, disconnect both terminals, starting with the negative, remove the battery from its housing, and fit the replacement.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windscreen on the Honda CBF 600
How to Replace the Windscreen on the Honda CBF 600
Cbf 600 To replace the windscreen on the Honda CBF 600, start by prying off the side trim panels at the base of the windscreen. Under these trims, you will f…
How do you replace the engine oil of the Honda CBF 600?
How do you replace the engine oil of the Honda CBF 600?
Cbf 600 The oil replacement of the Honda CBF 600 can be carried out by unscrewing the drain plug of the oil pan located in the central lower part of the vehi…
How do you replace the spark plug on the Honda CBF 600?
How do you replace the spark plug on the Honda CBF 600?
Cbf 600 To replace the spark plug on the Honda CBF 600, you need to loosen the screws that secure the cover panel located on the left side of the motorcycle,…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos