Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbf 600
Part: Engine oil

In this tutorial, we will see how to replace the engine oil in the Honda CBF 600, a very simple and quick operation. First of all, let's make sure that the engine is cool enough. Then, we place a container underneath the bike, locate the drain hole bolt, and unscrew it using a socket wrench. Next, we let all the oil contained in the system drain out, unscrew the old filter, and tighten both the new filter and the bolt. At this point, all that’s left to do is pour in the necessary amount of oil through the designated upper hole.

Posted on 20 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Honda CBF 600?
How do you replace the engine oil of the Honda CBF 600?
Cbf 600 The oil replacement of the Honda CBF 600 can be carried out by unscrewing the drain plug of the oil pan located in the central lower part of the vehi…
How to replace the engine oil in the Honda CBF 600?
How to replace the engine oil in the Honda CBF 600?
Cbf 600 In this tutorial, we can see how to replace the engine oil in the Honda CBF 600, an extremely simple and fast operation. First of all, make sure that…
How to Change the Engine Oil on a Honda CBF 600?
How to Change the Engine Oil on a Honda CBF 600?
Cbf 600 The engine oil present in the Honda CBF 600 can be removed by taking off the drain plug from the oil sump located at the central lower part of the bi…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos