Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbf 600
Part: Engine oil

In this tutorial, we can see how to replace the engine oil in the Honda CBF 600, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container under the motorcycle, locate the drainage hole bolt and unscrew it using a 12mm socket wrench. Let all the oil in the system drain out, unscrew the old filter using pliers and tighten both the replacement filter and the bolt. At this point, all that's left is to pour the necessary amount of oil through the appropriate upper hole.

Posted on 16 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Honda CBF 600?
How do you replace the engine oil of the Honda CBF 600?
Cbf 600 The oil replacement of the Honda CBF 600 can be carried out by unscrewing the drain plug of the oil pan located in the central lower part of the vehi…
How to change the engine oil in the Honda CBF 600?
How to change the engine oil in the Honda CBF 600?
Cbf 600 .. In this tutorial, we will see how to replace the engine oil in the Honda CBF 600, a very simple and quick operation. First of all,.. …
How to Change the Engine Oil on a Honda CBF 600?
How to Change the Engine Oil on a Honda CBF 600?
Cbf 600 The engine oil present in the Honda CBF 600 can be removed by taking off the drain plug from the oil sump located at the central lower part of the bi…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos