Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Yamaha Fazer 1000?

Model: Yamaha Fazer
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Yamaha Fazer 1000, an extremely simple and fast operation. First of all, we wait for the engine to be cold enough, then we position a container underneath it, locate the drain hole bolt and unscrew it using a 17mm socket wrench.

We then let all the oil in the system drain out, unscrew the old filter and tighten both the replacement and the bolt. At this point, all that's left is to pour the necessary amount of oil through the designated upper hole.


Posted on 6 July 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Yamaha Fazer?
How to Change the Engine Oil on the Yamaha Fazer?
Fazer You can change the engine oil on the Yamaha Fazer by loosening the drain plug located at the central bottom of the bike. Once unscrewed, allow all th…
Engine Oil and Filter Change for the Yamaha Fazer
Engine Oil and Filter Change for the Yamaha Fazer
Fazer Follow these steps to change the engine oil and filter on the Yamaha Fazer 1000. Place the motorcycle on the centre stand and warm the engine at idle…
How to change the engine oil of a Yamaha Fazer?
How to change the engine oil of a Yamaha Fazer?
Fazer To change the motor oil of a Yamaha Fazer, start by warming up the engine for a few minutes to thin out the oil, then turn it off. Make sure the moto…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos