Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the KTM 390

Model: Ktm 390
Part: Service warning light

Video tutorial

In this guide for your 2021 KTM 390, discover how to manually reset the maintenance (or service) light. First, position the bike on its stand and turn on the ignition.

Next, enter the settings and hold down the two buttons located on the left knob. Once done, press the "Set" button multiple times until you set the correct number of miles remaining until the next service.

Finally, exit the menu to save the changes. The reset of the light is now complete, and you can turn off the instrument panel.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a KTM 390
How to Reset the Service Light on a KTM 390
390 To manually reset the service light on your KTM 390's dashboard, follow these simple steps. First, place your bike on its stand for safety, then turn…
Replacing Brake Pads on a KTM 390
Replacing Brake Pads on a KTM 390
390 Today, you will see a very simple operation: replacing the brake pads on a KTM 390. On this motorcycle model, you do not even need to remove the cali…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos