Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a KTM 390

Model: Ktm 390
Part: Service warning light

Video tutorial

To manually reset the service light on your KTM 390's dashboard, follow these simple steps. First, place your bike on its stand for safety, then turn on the ignition.

Press and hold the up and down arrow buttons on the left switch simultaneously. Once in the new menu, release both buttons and press 'Set'. After a few seconds, release the button and restart the dashboard.

The service light reset is now complete.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

390 In this guide for your 2021 KTM 390, discover how to manually reset the maintenance (or service) light. First, position the bike on its stand and tur…
390 Today, you will see a very simple operation: replacing the brake pads on a KTM 390. On this motorcycle model, you do not even need to remove the cali…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos