Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil of a TVS Jupiter, start by warming up the engine for a few minutes to make the oil more fluid, then turn it off. Place the scooter on a central stand for stability. Locate the oil drain plug under the engine. Place a basin under the plug to collect the used oil. Use a wrench to unscrew the drain plug and let the oil drain completely into the basin. Once all the oil is drained, clean the plug and the drain hole, then put the drain plug back on and tighten it securely. Next, locate the oil filler cap, remove it, and use a funnel to slowly pour the recommended amount of new oil as specified in the owner's manual. Make sure to use the specified type and amount of oil. After adding the oil, replace the filler cap. Start the engine for a few minutes to circulate the new oil, then turn it off and visually check for any leaks.

Posted on 3 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time on the Jupiter 125
How to adjust the time on the Jupiter 125
Jupiter The time change is approaching, and with it the need to update the clock on the TVS Jupiter 125 motorcycle. To set the clock, you will need to: - tur…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos