Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on the BMW F800GS

Model: Bmw F800gs
Part: Headlight

Video tutorial

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip.

Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb on a BMW F800GS
Replacing the Front Headlight Bulb on a BMW F800GS
F800gs In today's video tutorial, you will learn how to remove and replace the front headlight bulb on a BMW F800GS in simple steps. First, remove the prote…
How to replace the front headlight of the BMW F800 GS
How to replace the front headlight of the BMW F800 GS
F800gs The following steps will show us how to disassemble and replace the front headlight and its bulbs on the BMW F800 GS motorcycle. First, we put the mo…
How to Reset the Service Light on a BMW F800GS
How to Reset the Service Light on a BMW F800GS
F800gs To reset the Service light on a BMW F800GS, there is no procedure that can be done independently: you will need to connect a diagnostic tool to the v…

How to Replace the Handlebars on the Ducati Scrambler

This guide provides instructions on how to remove and replace the handlebars on the Ducati Scrambler motorcycle, following the steps outlined below. First, place the bike on its centre stand and begin removing the grips by unscrewing the screws and taking off the bar ends; then unscrew the handlebar mounting screws to remove the handlebars, as shown in the video. At this point, correctly install the new handlebars to ensure they are centred; then reassemble and secure the grips and side bar ends, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos