Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Oil Warning Light on a Harley-Davidson?

Model: (Various brands) Various
Part: Service warning light

Video tutorial

In this tutorial, you will see how to remove the oil warning light on a Harley-Davidson, a very simple and quick operation that should be done only after completing the required scheduled maintenance work. First, insert the key and turn on the instrument panel, then press the lower right button to enter the service menu.

Scroll through the various options using the touchscreen controls, enter 'Reset', and perform the reset by selecting 'Mileage Reset'. To verify that the operation was successful, you can restart the instrument panel.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Tank on a Harley Davidson
How to Remove the Fuel Tank on a Harley Davidson
(Various brands) Various .. remove the central fuel tank on Harley Davidson motorcycles. This tutorial applies to multiple models from the American manufacturer. First,.. …
How to Adjust the Clock on a Harley Davidson Motorcycle
How to Adjust the Clock on a Harley Davidson Motorcycle
(Various brands) Various .. you can see how to adjust the clock on a Harley Davidson motorcycle: first, turn on the ignition, then use the button located on the left handlebar... …
Replacing the Key Battery on Harley Davidson Motorcycles
(Various brands) Various .. Replacing the battery in a Harley Davidson key is really straightforward, and we will demonstrate it now. Open the key fob using a small.. …

    Frequently Asked Questions

    • Vari - How do you reset the Sym Fiddle's oil warning light? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Replace the Clutch on a Kymco Downtown 125?

To replace the clutch on the Kymco Downtown 125, loosen the screws that secure the cover located on the left side of the bike, near the rear wheel. Once the screws are loosened, remove the cover to access the components underneath: the clutch at the rear can be removed by unscrewing the fixing screws and sliding out all the discs that make it up. At this point, insert the new replacement part, reposition the drive belt, and cover everything with the cover.

Watch the video!


by ScegliAuto

More videos