Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in a Keeway K-Light 125?

Model: Keeway K Light 125
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Keeway K-Light 125, a very simple and quick operation to be carried out every 12 months. First, wait for the engine to cool completely, then position a container underneath it, open the upper filler cap, and unscrew the drain bolt.

Once all the oil has drained from the system, open the filter housing cap, clean any residual dirt, and reassemble everything. At this point, simply add new oil through the upper hole.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to change the engine oil of a Keeway K-Light 125
How to change the engine oil of a Keeway K-Light 125
K Light 125 .. Start by positioning your Keeway K-Light 125 upright using a motorcycle stand, then start and run the engine for a few minutes. Next, unscrew.. …
How do you replace the rear brake pads of the Keeway K-Light 125?
How do you replace the rear brake pads of the Keeway K-Light 125?
K Light 125 .. to replace the rear brake pads of the Keeway K-Light 125, you will need to loosen the screws that secure the brake caliper to the corresponding disc... …
How to replace the exhaust on the Keeway K-Light 125?
How to replace the exhaust on the Keeway K-Light 125?
K Light 125 .. To replace the exhaust on the Keeway K-Light 125, loosen the screws that secure the exhaust terminal to its housing, located near the rear wheel.. …

How to Replace the Wing Mirror on a Harley Davidson Sportster

To replace the wing mirror on a Harley Davidson Sportster, loosen the nut located at the base of the mirror, at the bottom of the handlebars. Once this nut is fully loosened, you can slide out the pin that secures the mirror to the handlebars, completely removing the old mirror from its housing and replacing it with a new replacement part. The new mirror should be positioned, inserting the corresponding pin, and finally secured by tightening the nut at the bottom of the handlebars.

Watch the video!


by ScegliAuto

More videos