Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the exhaust pipe of the Keeway K-Light 125, you need to loosen the screws that secure the exhaust terminal to its housing, located near the rear wheel on the right side of the bike: once these screws have been loosened, you can proceed by expanding the ring that connects the connecting clamp between the exhaust pipe and the manifold. This way you can remove the old exhaust in order to position the new one: by fixing it to the supports with screws and connecting the ring between the exhaust pipe and the manifold, you can check that everything is functioning properly.

Posted on 30 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Oil in a Keeway K-Light 125?
How to Change the Oil in a Keeway K-Light 125?
K Light 125 .. see how to change the engine oil in the Keeway K-Light 125, a very simple and quick operation to be carried out every 12 months. First, wait for the engine.. …
How do you replace the rear brake pads of the Keeway K-Light 125?
How do you replace the rear brake pads of the Keeway K-Light 125?
K Light 125 .. to replace the rear brake pads of the Keeway K-Light 125, you will need to loosen the screws that secure the brake caliper to the corresponding disc... …
How to change the engine oil of a Keeway K-Light 125
How to change the engine oil of a Keeway K-Light 125
K Light 125 .. Start by positioning your Keeway K-Light 125 upright using a motorcycle stand, then start and run the engine for a few minutes. Next, unscrew.. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos