Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Keeway
    3. : K Light 125

Keeway K Light 125 - Video guides

Keeway K Light 125
How to Replace the Front Headlight Bulb on a Keeway K-Light 125?
You can replace the front headlight bulb on the Keeway K-Light 125 by loosening the screws that secure the front light unit: these will be located on the lower …Read all…
Posted on 29 August 2026 by ScegliAuto
Keeway K Light 125
How do you replace the rear brake pads of the Keeway K-Light 125?
In order to replace the rear brake pads of the Keeway K-Light 125, you will need to loosen the screws that secure the brake caliper to the corresponding disc. …Read all…
Posted on 12 April 2025 by ScegliAuto
Keeway K Light 125
How to replace the exhaust on the Keeway K-Light 125?
To replace the exhaust on the Keeway K-Light 125, loosen the screws that secure the exhaust terminal to its housing, located near the rear wheel on the right …Read all…
Posted on 3 October 2026 by ScegliAuto
Keeway K Light 125
How to Replace the Front Headlight on a Benelli K-Light 125?
To replace the front headlight on a Benelli K-Light 125, loosen the screws that secure it to its housing. These screws will be located on the lower side of the …Read all…
Posted on 29 August 2026 by ScegliAuto
Keeway K Light 125
How to Change the Oil in a Keeway K-Light 125?
In this tutorial, you will see how to change the engine oil in the Keeway K-Light 125, a very simple and quick operation to be carried out every 12 months. …Read all…
Posted on 24 September 2026 by ScegliAuto
Keeway K Light 125
How to change the engine oil of a Keeway K-Light 125
Start by positioning your Keeway K-Light 125 upright using a motorcycle stand, then start and run the engine for a few minutes. Next, unscrew and remove the …Read all…
Posted on 24 May 2026 by ScegliAuto
Keeway K Light 125
Engine Oil Change for a Keeway K-light 125
This is a descriptive guide for changing the engine oil of a Keeway K-light 125. Obtain 1L of Motul 7100 SAE 10W40 oil. Position the motorcycle on the rear …Read all…
Posted on 31 March 2026 by ScegliAuto

See also:

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos