Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Keeway K-Light 125?

Model: Keeway K Light 125
Part: Headlight bulb

Video tutorial

You can replace the front headlight bulb on the Keeway K-Light 125 by loosening the screws that secure the front light unit: these will be located on the lower side of the headlamp. The light unit can now be detached from its housing, allowing you to disconnect the connector at the back: you can then extract the bulb from its socket and connect the new one to the connector.

Finally, reposition the headlamp in its housing and secure it with the screws on the sides of the light unit.


Posted on 29 August 2026 by ScegliAuto


Related tutorials

How do you replace the rear brake pads of the Keeway K-Light 125?
How do you replace the rear brake pads of the Keeway K-Light 125?
K Light 125 .. to replace the rear brake pads of the Keeway K-Light 125, you will need to loosen the screws that secure the brake caliper to the corresponding disc... …
How to change the engine oil of a Keeway K-Light 125
How to change the engine oil of a Keeway K-Light 125
K Light 125 .. Start by positioning your Keeway K-Light 125 upright using a motorcycle stand, then start and run the engine for a few minutes. Next, unscrew.. …
How to Change the Oil in a Keeway K-Light 125?
How to Change the Oil in a Keeway K-Light 125?
K Light 125 .. see how to change the engine oil in the Keeway K-Light 125, a very simple and quick operation to be carried out every 12 months. First, wait for the engine.. …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos