Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This is a descriptive guide for changing the engine oil of a Keeway K-light 125. Obtain 1L of Motul 7100 SAE 10W40 oil. Position the motorcycle on the rear stand or lift. Place a container for collecting the waste oil under the engine. Using a 4mm Allen key, unscrew the screw on the side panel under the seat, right side, and detach it. Move the starter lever and open the oil filler cap. Using a 10mm socket wrench, unscrew the fixing bolt of the gear lever on the left side of the engine. Using a ratchet and a 13mm socket, unscrew the oil drain plug located under the engine on the left side. Allow all the oil to drain out. Using a ratchet and a 17mm socket, unscrew the filter cover located under the left side of the engine casing. Remove the spring and the seal with the filter cartridge, taking care with the orientation. Clean thoroughly and refit. Screw the oil drain plug back in. Pour in the oil, referring to the inspection hole located under the casing. Clean thoroughly.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil of a Keeway K-Light 125
How to change the engine oil of a Keeway K-Light 125
K Light 125 .. Start by positioning your Keeway K-Light 125 upright using a motorcycle stand, then start and run the engine for a few minutes. Next, unscrew.. …
How to Change the Oil in a Keeway K-Light 125?
How to Change the Oil in a Keeway K-Light 125?
K Light 125 .. see how to change the engine oil in the Keeway K-Light 125, a very simple and quick operation to be carried out every 12 months. First, wait for the engine.. …
How do you replace the exhaust pipe of the Keeway K-Light 125?
How do you replace the exhaust pipe of the Keeway K-Light 125?
K Light 125 .. to replace the exhaust pipe of the Keeway K-Light 125, you need to loosen the screws that secure the exhaust terminal to its housing, located near.. …

How to Reset the Trip A Mileage on a BMW R1250 GS

This guide will show you the steps to reset the Trip A mileage on the BMW R1250 GS enduro motorcycle. First, place the bike on its centre stand and turn on the instrument panel. Navigate to the menu settings by pressing the button located on the left of the handlebars, and access the onboard computer where the partial mileage is displayed, as shown in the video. At this point, reset the partial mileage as indicated in the video; you can reset the partial mileage at any time.

Watch the video!


by ScegliAuto

More videos