Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the transmission oil in the KTM XC-W 250

Model: Ktm Xc 250
Part: Transmission fluid

Video tutorial

In this video tutorial, you will learn how to change the transmission oil in the KTM EXC-W 250 enduro bike, in simple and quick steps. First, remove the metal guard located under the engine, then unscrew the oil drain bolt; allow the old oil to drain into a container for about ten minutes.

At this point, open the fill hole by unscrewing the cap and pour in the new transmission oil of the correct type; fill to the maximum level, following the video tutorial to the end for reassembly!


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to replace the transmission oil seal on the KTM XC 250
How to replace the transmission oil seal on the KTM XC 250
Xc 250 .. on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt;.. …
How to Change the Engine Oil on a KTM XC 250
How to Change the Engine Oil on a KTM XC 250
Xc 250 Here are the main steps for performing routine maintenance by changing the engine oil and oil filter on the KTM XC 250, as well as the XC 300. First,…
How to Change the Engine Oil on a KTM XC 250
How to Change the Engine Oil on a KTM XC 250
Xc 250 These brief and simple steps will show you how to carry out the service and change the engine oil on the KTM XC 250 enduro bike. First, drain the eng…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos